"mount bug" (Archos 70)

Only select few users can see this forum
Post Reply
Shotokan
Archos User
Archos User
Posts: 72
Joined: Mon Aug 16, 2010 2:35 pm
Location: localhost
Contact:

"mount bug" (Archos 70)

Post by Shotokan »

I've found in the forum that a lot of people have this bug:
the usb host does not work at all after '71 update.

well, if i connect the usb host cable without any usb device attached, that's the of dmesg output:

Code: Select all

twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 1
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 1
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 1
usb_switch_print_state: 3 ATTACHED_HOST

usb_switch_print_state: 3 ATTACHED_HOST

twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 0
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 0
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 0
musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 1
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 1
twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 1
musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
musb_hdrc musb_hdrc: MUSB HDRC host driver
/mnt/flash/releases/G8A/v2.0.70-r81036/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
usb usb2: default language 0x0409
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: MUSB HDRC host driver
usb usb2: Manufacturer: Linux 2.6.29-omap1 musb-hcd
usb usb2: SerialNumber: musb_hdrc
usb usb2: uevent
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
usb 2-0:1.0: uevent
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: individual port power switching
hub 2-0:1.0: no over-current protection
hub 2-0:1.0: power on to power good time: 10ms
hub 2-0:1.0: 100mA bus power budget for each child
hub 2-0:1.0: local power source is good
hub 2-0:1.0: enabling power on all ports
/mnt/flash/releases/G8A/v2.0.70-r81036/arcbuild/linux/drivers/usb/core/inode.c: creating file '001'
hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend
the output is the same if i connect an usb device (such as usb memory, usb mouse, usb keyboard.. nothing works at all.)
that's the mount output (the output is the same even connecting the usb memory)

Code: Select all

rootfs on / type rootfs (rw)
/dev/mmcblk0p2 on /mnt/system type ext3 (rw,noexec,noatime,errors=continue,data=ordered)
/dev/loop0 on / type squashfs (ro,noatime)
tmpfs on /dev type tmpfs (rw,mode=755)
devpts on /dev/pts type devpts (rw,mode=600)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
usbfs on /proc/bus/usb type usbfs (rw,devuid=1000,busuid=1000,listuid=1000)
debugfs on /sys/kernel/debug type debugfs (rw)
tmpfs on /mnt/asec type tmpfs (rw,mode=755,gid=1000)
tmpfs on /tmp type tmpfs (rw)
/dev/block/mmcblk0p1 on /mnt/rawfs type rawfs (rw)
/dev/block/mmcblk0p2 on /mnt/system type ext3 (rw,nosuid,noexec,noatime,errors=continue,data=ordered)
/dev/block/mmcblk0p3 on /cache type ext3 (rw,nosuid,noexec,noatime,errors=continue,data=ordered)
/dev/block/mmcblk0p4 on /data type ext3 (rw,nosuid,noatime,errors=continue,data=ordered)
none on /dev/cpuctl type cgroup (rw,cpu)
tmpfs on /dev/shm type tmpfs (rw)
/dev/block/vold/179:9 on /mnt/storage type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
/dev/block/vold/179:9 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
tmpfs on /mnt/storage/.android_secure type tmpfs (ro,size=0k,mode=000)
/dev/block/vold/179:17 on /mnt/storage/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
fusesmb on /mnt/storage/network/smb type fuse (rw,nosuid,nodev,user_id=0,group_id=0,allow_other,max_read=32768)
/dev/block/dm-0 on /mnt/asec/com.wyse.pocketcloudfree-1 type vfat (ro,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
djmount on /mnt/storage/network/upnp type fuse (ro,nosuid,nodev,user_id=0,group_id=0,allow_other)
/dev/block/dm-1 on /mnt/asec/com.rovio.angrybirds-1 type vfat (ro,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
/dev/block/dm-2 on /mnt/asec/com.world.newspapers-1 type vfat (ro,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1,utf8,errors=remount-ro)
I guess the kernel "dunno" what's an usb device xD
z0n3-h4ck.net
Post Reply

Return to “Beta Testing”