Flash firmware with broken usb connector , frozen on arnova

New Rockchip RK2918 ARM Cortex-A8 capacitive Android 2.3 capacitive tablets
Post Reply
stonemad
Archos Novice
Archos Novice
Posts: 1
Joined: Sat Sep 08, 2012 6:16 pm

Flash firmware with broken usb connector , frozen on arnova

Post by stonemad »

Hi there , i have an arnova 10 g2 , but it has a broken usb connection , it has also frozen on the arnova screen . I have tried holding down reset and double pushing volume up to get the recovery menu but it does nothing . I think the only way i am going to get it to work is solder the usb cable to the board , but the tracks must have ripped up when the usb port got broke. Would there be any part of the motherboard i could attach the wires that would allow me to flash with the rockchip program , its only the tracks to the port that are damaged all the rest of the board is good. Or is there any other way i could get this tablet working ?
Cheers , Andy
Post Reply

Return to “Arnova 10 G2, Arnova 9 G2, Arnova 8 G2, Arnova 7 G2”