I have just bought an Arnova 8 G2 and tried to change the firmware. Something went wrong and now when it swithes on I get a black screen with the Arnova Logo. I was wondering if anyone nows how to start it in recovery mode. There is nothing for the 8 G2 on the Arnova website and the forums I have read have told be to hold the reset button and press the + 4 times. This isnt working for me, any help would be appretiated.
I have a arnova 10g2. could only put it into recovery mode by keeping the plus volume button pressed and then getting a pin to reset it. i had to keep the plus button pressed while i reflashed because if i didn't the tablet would turn on which I don't think is a good thing during this procedure. had a sore finger but it worked! hope this helps..