Forum.ArchosFans.com

Unofficial Archos Support Forum
It is currently Mon Dec 09, 2019 4:52 pm

All times are UTC+01:00




Post new topic  Reply to topic  [ 91 posts ]  Go to page Previous 1 2 3 4 5 Next
Author Message
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 1:48 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
Thanks for your reply penguinrepair :)
I Find snd-soc-tda19989.ko from Debian in Gen8 WebSite.this file is one of five file which copy from android module to debian for sound drivers . please send me one list of your module from android . how you can install sound in debian ? do you know how installing hardware in second os by mouldes of orginal os (installing debian hardware from android modules.ko). :?:
how find sound error ? hardware or software ? thanks ;)


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 5:15 pm 
Offline
Archos Novice
Archos Novice

Joined: Mon Mar 14, 2011 8:28 pm
Posts: 23
So far I know snd-soc-tda19989.ko is a gen 8 module and you don't need it for gen 7.
have you inserted all of these modules and in the correct order:

insmod snd-soc-omap.ko <- you can find it in android
insmod snd-soc-omap-mcbsp.ko
insmod snd-soc-wl1271.ko <- you can find it in android, optional, (fm radio)
insmod snd-soc-wm8985.ko <- (probably already inserted but just to be sure)
insmod snd-soc-archos.ko

and then alsamixer should work


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 6:03 pm 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
Jonathan Moerman wrote:
have you inserted all of these modules and in the correct order:
insmod snd-soc-omap.ko <- you can find it in android
insmod snd-soc-omap-mcbsp.ko
insmod snd-soc-wl1271.ko <- you can find it in android, optional, (fm radio)
insmod snd-soc-wm8985.ko <- (probably already inserted but just to be sure)
insmod snd-soc-archos.ko
and then alsamixer should work


yes, as soon as snd-soc-archos is loaded "segment faulted"

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 6:08 pm 
Offline
Archos Novice
Archos Novice

Joined: Mon Mar 14, 2011 8:28 pm
Posts: 23
did you take the ones from android and not the ones of angstrom??
I am using the android ones...

sometimes something works on this device and sometimes it doesn't. :|


Last edited by Jonathan Moerman on Sun Jul 17, 2011 6:10 pm, edited 1 time in total.

Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 6:10 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
hello :D
thank you dear Jonathan Moerman for your reply . :)
when insmod snd-soc-omap.ko answer : insmod:error inserting 'snd-soc-omap.ko':Unknown symbol in module. :roll:
other module inserted correctly but can`t play anything. and when type alsamixein in RUN nothing implement.when add music in music player nothing appear in menu . only disk writer is in musicplayer>file>perference>audio>output>plugin.


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 6:13 pm 
Offline
Archos Novice
Archos Novice

Joined: Mon Mar 14, 2011 8:28 pm
Posts: 23
Ah can I see your dmesg output??
I had that error with snd-soc-archos and needed snd-soc-omap.


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sun Jul 17, 2011 8:12 pm 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
Jonathan Moerman wrote:
Ah can I see your dmesg output??
I had that error with snd-soc-archos and needed snd-soc-omap.

yes, mknod /dev/snd... was never done
i got it working, but video quality still poor
i think i want to try to see if i can incorporate the "stuff" from 2.0.45 to get the factory 3D working, i am using the sde kernel, and have been experimenting with a few others, i looked through some of my backups and found a source tarball that may work :doubt: i've just reflashed back to the stage-1 of my instructions and im about to modify the bubu sources for swap so i can gain multi boot...
"interesting stuff, alot of rescources out there .... my head hurts :lol:"

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Mon Jul 18, 2011 6:27 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
Jonathan Moerman wrote:
did you take the ones from android and not the ones of angstrom??
I am using the android ones...

sometimes something works on this device and sometimes it doesn't. :|


Wish you really think about it not only say !!! mr or mrs Unknown


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Tue Jul 19, 2011 6:06 am 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
floyd_cansil wrote:
hello :D
thank you dear Jonathan Moerman for your reply . :)
when insmod snd-soc-omap.ko answer : insmod:error inserting 'snd-soc-omap.ko':Unknown symbol in module. :roll:
other module inserted correctly but can`t play anything. and when type alsamixein in RUN nothing implement.when add music in music player nothing appear in menu . only disk writer is in musicplayer>file>perference>audio>output>plugin.


try typing dmesg you will see the output log on why it wasn't inserted, also try removing uneeded modules with rmmod, to view current modules type lsmod, the problem i had was a "fragged" image now with reflash back to factory and a fresh image set up i have sound... note step "1"
Quote:
floyd: why reflash?
penguinrepair: because i always start with a clean slate...

sorry for the hippocracy, and thank you johnathan
Quote:
@unknown: now... not really impressive or something.

i'm not here to impress... i'm here for assistance...

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Tue Jul 19, 2011 3:20 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
hello and Thanks :
sound not work[b] :roll:
[b]dmesg file :


Quote:
36 bytes)
Memory: 200MB = 200MB total
Memory: 191360KB available (2876K code, 699K data, 140K init)
Calibrating delay loop... 499.92 BogoMIPS (lpj=1949696)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 440 bytes
NET: Registered protocol family 16
archos_accel_init: irq1 275, irq2 274
MUX: setup AH18_3430_GPIO115 (0xd800213a): 0x1304 -> 0x1704
MUX: setup AG18_3430_GPIO114 (0xd8002138): 0x1304 -> 0x1704
MUX: setup J21_34XX_I2C1_SDA (0xd80021bc): 0x3718 -> 0x0100
MUX: setup K21_34XX_I2C1_SCL (0xd80021ba): 0x3718 -> 0x0100
MUX: setup AE15_34XX_I2C2_SDA (0xd80021c0): 0x1714 -> 0x0100
MUX: setup AF15_34XX_I2C2_SCL (0xd80021be): 0x1714 -> 0x0100
MUX: setup AG14_34XX_I2C3_SDA (0xd80021c4): 0x1718 -> 0x0100
MUX: setup AF14_34XX_I2C3_SCL (0xd80021c2): 0x1718 -> 0x0100
MUX: setup AF3_3430_GPIO138 (0xd8002168): 0x1604 -> 0x0204
MUX: setup Y21_3430_GPIO156 (0xd800218c): 0x1604 -> 0x0204
MUX: setup AE3_3430_GPIO139 (0xd800216a): 0x1604 -> 0x0204
MUX: setup R8_3430_GPT10 (0xd80020b8): 0x0013 -> 0x0003
MUX: setup AA21_3430_GPIO157 (0xd800218e): 0x1604 -> 0x0004
MUX: setup AH3_3430_GPIO137 (0xd8002166): 0x1604 -> 0x0004
MUX: setup V8_3430_GPIO53 (0xd80020b2): 0x1604 -> 0x0204
MUX: setup AE4_3430_GPIO136 (0xd8002164): 0x1604 -> 0x0004
MUX: setup P8_3430_GPIO57 (0xd80020ba): 0x1614 -> 0x1704
MUX: setup AH17_3430_GPIO100 (0xd8002118): 0x130c -> 0x0104
MUX: setup H18_3430_GPIO163 (0xd800219a): 0x1604 -> 0x0204
MUX: setup AF26_3430_GPIO0 (0xd80021e0): 0x170c -> 0x3704
Found NAND on CS0
Registering NAND on CS0
MUX: setup AF25_3430_GPIO1 (0xd8002a06): 0x0108 -> 0x0104
ads7846_dev_init: irq_gpio 11, pwr_gpio 54
MUX: setup U8_3430_GPIO54 (0xd80020b4): 0x161c -> 0x0004
MUX: setup AA11_3430_GPIO11 (0xd8002a24): 0x0104 -> 0x1704

Enable clock [uart1_ick]<6>
Enable clock [uart1_fck]<6>
Enable clock [uart2_ick]<6>
Enable clock [uart2_fck]<6>
Enable clock [uart3_ick]<6>
Enable clock [uart3_fck]<4>MUX: setup K26_3430_GPIO161 (0xd8002196): 0x170c -> 0x0004
archos_hsmmc_init
MUX: setup V21_3430_GPIO158 (0xd8002190): 0x170c -> 0x1704
MUX: setup J8_3430_GPIO65 (0xd80020d2): 0x170c -> 0x0104
MUX: setup N28_3430_MMC1_CLK (0xd8002144): 0x170c -> 0x0000
MUX: setup M27_3430_MMC1_CMD (0xd8002146): 0x170c -> 0x0100
MUX: setup N27_3430_MMC1_DAT0 (0xd8002148): 0x170c -> 0x0100
MUX: setup N26_3430_MMC1_DAT1 (0xd800214a): 0x170c -> 0x0100
MUX: setup N25_3430_MMC1_DAT2 (0xd800214c): 0x170c -> 0x0100
MUX: setup P28_3430_MMC1_DAT3 (0xd800214e): 0x170c -> 0x0100
MUX: setup M3_3430_GPIO41 (0xd8002088): 0x170c -> 0x0004
MUX: setup AE10_3430_USB1HS_PHY_CLK (0xd80025da): 0x1714 -> 0x0003
MUX: setup AF10_3430_USB1HS_PHY_STP (0xd80025d8): 0x1714 -> 0x0003
MUX: setup AF9_3430_USB1HS_PHY_DIR (0xd80025ec): 0x1704 -> 0x1703
MUX: setup AG9_3430_USB1HS_PHY_NXT (0xd80025ee): 0x1704 -> 0x1703
MUX: setup AF11_3430_USB1HS_PHY_DATA0 (0xd80025dc): 0x1704 -> 0x1703
MUX: setup AG12_3430_USB1HS_PHY_DATA1 (0xd80025de): 0x1704 -> 0x1703
MUX: setup AH12_3430_USB1HS_PHY_DATA2 (0xd80025e0): 0x1714 -> 0x1703
MUX: setup AH14_3430_USB1HS_PHY_DATA3 (0xd80025ea): 0x1704 -> 0x1703
MUX: setup AE11_3430_USB1HS_PHY_DATA4 (0xd80025e4): 0x1704 -> 0x1703
MUX: setup AH9_3430_USB1HS_PHY_DATA5 (0xd80025e6): 0x1704 -> 0x1703
MUX: setup AF13_3430_USB1HS_PHY_DATA6 (0xd80025e8): 0x1704 -> 0x1703
MUX: setup AE13_3430_USB1HS_PHY_DATA7 (0xd80025e2): 0x1704 -> 0x1703
archos_usbhdd_init: hdd_pwr on GPIO129
MUX: setup R25_3430_GPIO129 (0xd8002156): 0x170c -> 0x0004
MUX: setup AB1_3430_GPIO176 (0xd80021d2): 0x170c -> 0x1604
MUX: setup J25_34XX_GPIO170 (0xd80021c6): 0x161c -> 0x0004
MUX: setup AG17_3430_GPIO99 (0xd8002116): 0x130c -> 0x1704
Audio GPIO init done
MUX: setup AG19_3430_GPIO112 (0xd8002134): 0x1304 -> 0x0104
MUX: setup AH19_3430_GPIO113 (0xd8002136): 0x1304 -> 0x0104
MUX: setup B26_3430_GPIO111 (0xd800212e): 0x170c -> 0x1604
MUX: setup AA10_3430_GPIO31 (0xd8002a26): 0x0104 -> 0x011c
MUX: setup W21_3430_GPIO162 (0xd8002198): 0x1604 -> 0x0004
MUX: setup W8_3430_UART1_CTS (0xd8002180): 0x1710 -> 0x0108
MUX: setup AA9_3430_UART1_RTS (0xd800217e): 0x1600 -> 0x0108
MUX: setup Y8_3430_UART1_RX (0xd8002182): 0x1700 -> 0x0118
MUX: setup AA8_3430_UART1_TX (0xd800217c): 0x1600 -> 0x0118
archos_wifi_set_power on (wifi), pwr: 111
MUX: setup AE2_3430_MMC2_CLK (0xd8002158): 0x170f -> 0x1718
MUX: setup AG5_3430_MMC2_CMD (0xd800215a): 0x170f -> 0x1718
MUX: setup AH5_3430_MMC2_DAT0 (0xd800215c): 0x170f -> 0x1718
MUX: setup AH4_3430_MMC2_DAT1 (0xd800215e): 0x170f -> 0x1718
MUX: setup AG4_3430_MMC2_DAT2 (0xd8002160): 0x170f -> 0x1718
MUX: setup AF4_3430_MMC2_DAT3 (0xd8002162): 0x170f -> 0x1718
archos_wifi_set_power off (wifi), pwr: 111
MUX: setup AE2_3430_SAFE (0xd8002158): 0x1718 -> 0x010f
MUX: setup AG5_3430_SAFE (0xd800215a): 0x1718 -> 0x010f
MUX: setup AH5_3430_SAFE (0xd800215c): 0x1718 -> 0x010f
MUX: setup AH4_3430_SAFE (0xd800215e): 0x1718 -> 0x010f
MUX: setup AG4_3430_SAFE (0xd8002160): 0x1718 -> 0x010f
MUX: setup AF4_3430_SAFE (0xd8002162): 0x1718 -> 0x010f
MUX: setup AH26_3430_GPIO2 (0xd8002a0a): 0x1704 -> 0x0004
System clock speed: 12000000, mpu speed : 500000000, l3_speed : 166000000
MUX: setup U21_3430_GPIO159 (0xd8002192): 0x1604 -> 0x0a04
OMAP DMA hardware revision 4.0
USB: No board-specific platform config found
OMAP DSS rev 2.0
OMAP DISPC rev 3.0
OMAP VENC rev 2
OMAP DSI rev 1.0
display_class_init<6>omap-uart.1: ttyS0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART1
omap-uart.2: ttyS1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART2
omap-uart.3: ttyS2 at MMIO 0x49020000 (irq = 74) is a OMAP UART3
console [ttyS2] enabled
omapdss DISPC error: dispc irq error status 03a2
i2c_omap i2c_omap.1: bus 1 rev3.12 at 100 kHz
i2c_omap i2c_omap.2: bus 2 rev3.12 at 100 kHz
i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
MSP430 I2C version 0.1 (06-January-2006)
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
omapdss DISPC error: dispc irq error status 0382
usbcore: registered new device driver usb
omapdss DISPC error: dispc irq error status 02a0
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
omapdss DISPC error: dispc irq error status 03a2
omapdss DISPC error: dispc irq error status 03a2
omapdss DISPC error: dispc irq error status 03a2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
omapdss DISPC error: dispc irq error status 03a2
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
omapdss DISPC error: dispc irq error status 03a2
NET: Registered protocol family 1
checking if image is initramfs...<3>omapdss DISPC error: dispc irq error status 03a2
omapdss DISPC error: dispc irq error status 03a2
it is
Freeing initrd memory: 504K
Power Management for TI OMAP.
create_proc_entry succeeded
MUX: setup C24_3430_GPIO102 (0xd800211c): 0x1604 -> 0x1704
MUX: setup T21_3430_GPIO160 (0xd8002194): 0x1614 -> 0x1704
MUX: setup AC3_3430_GPIO175 (0xd80021d0): 0x170c -> 0x1704
MUX: setup AA25_3430_UART2_TX (0xd8002178): 0x1600 -> 0x0000
NetWinder Floating Point Emulator V0.97 (double precision)
ashmem: initialized
msgmni has been set to 375
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
hx5091 spi5.0: initialized
input: atmega-key as /devices/virtual/input/input0
atmega_io_setalarm: CLEAR
ATMEGA RTC Driver v1.0 for G7X
atmega-rtc atmega-rtc: rtc core: registered atmega-rtc as rtc0
brd: module loaded
loop: module loaded
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
i2c /dev entries driver
Driver 'sd' needs updating - please use bus_type methods
input: gpio-keys as /devices/platform/gpio-keys/input/input1
ads7846 spi1.0: touchscreen, irq 171
input: ADS784x Touchscreen as /devices/platform/omap2_mcspi.1/spi1.0/input/input2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
GRE over IPv4 tunneling driver
TCP cubic registered
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
registering Android USB device (A5S-62920004-00000000-0403683C-1901E007)
archos_accessory_set_irmode: enabling UART-3...
MUX: setup H20_3430_UART3_RX_IRRX (0xd800219e): 0x1707 -> 0x1700
MUX: setup H21_3430_UART3_TX_IRTX (0xd80021a0): 0x1607 -> 0x0000
archos_accessory_set_irmode: disabling IR...
MUX: setup T8_3430_GPIO55 (0xd80020b6): 0x1614 -> 0x0104
MUX: setup N8_3430_GPIO58 (0xd80020bc): 0x1614 -> 0x0104
archos_accessory_init: gpio 61
MUX: setup U3_3430_GPIO61 (0xd80020c8): 0x170c -> 0x0104
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
Registered led device: lcd-backlight
panel_enable [samsung_wvga_48]
atmega-rtc atmega-rtc: gettime
atmega_io_get_clockval: clocknum 0 time_counter: 1238239 time_diff 1369241759
atmega-rtc atmega-rtc: setting system clock to 2013-06-06 00:53:18 UTC (1370479998)
Freeing init memory: 140K
omap2-nand driver initializing
NAND device: Manufacturer ID: 0x20, Chip ID: 0xba (ST Micro NAND 256MiB 1,8V 16-bit)
Scanning device for bad blocks
Bad eraseblock 983 at 0x07ae0000
cmdlinepart partition parsing not available
Creating 7 MTD partitions on "omap2-nand":
0x00000000-0x00080000 : "stage1"
0x00080000-0x00100000 : "stage2"
0x00100000-0x00400000 : "recovery"
0x00400000-0x00680000 : "init"
0x00680000-0x00720000 : "storex"
0x00720000-0x06120000 : "system"
0x06120000-0x10000000 : "data"
UBI: attaching mtd5 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd5 to ubi0
UBI: MTD device name: "system"
UBI: MTD device size: 90 MiB
UBI: number of good PEBs: 720
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 720
UBI: number of PEBs reserved for bad PEB handling: 7
UBI: max/mean erase counter: 6/4
UBI: attaching mtd6 to ubi1
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: background thread "ubi_bgt0d" started, PID 385
UBI: attached mtd6 to ubi1
UBI: MTD device name: "data"
UBI: MTD device size: 158 MiB
UBI: number of good PEBs: 1270
UBI: number of bad PEBs: 1
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 1270
UBI: number of PEBs reserved for bad PEB handling: 12
UBI: max/mean erase counter: 15/6
UBI: background thread "ubi_bgt1d" started, PID 388
usbhdd_power 1
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
Initializing USB Mass Storage driver...
usb 1-1: new high speed USB device using ehci-omap and address 2
usb 1-1: configuration #1 chosen from 1 choice
devdb: devpath usb-ehci-omap.0-1 not found
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
scsi 0:0:0:0: Direct-Access ARCHOS USB DISK 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: [sda] 62521344 512-byte hardware sectors (32011 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 62521344 512-byte hardware sectors (32011 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on sda1, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
UBIFS: background thread "ubifs_bgt0_0" started, PID 454
UBIFS: mounted UBI device 0, volume 0, name "system"
UBIFS: file system size: 88756224 bytes (86676 KiB, 84 MiB, 699 LEBs)
UBIFS: journal size: 4444160 bytes (4340 KiB, 4 MiB, 35 LEBs)
UBIFS: default compressor: LZO
UBIFS: media format 4, latest format 4
ATMEGA KBON pressed
ATMEGA KBON released
UBIFS: un-mount UBI device 0, volume 0
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on loop0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MMA7456L : Chip ID = 0x55, User Info = 0xAA
input: MMA7456L Accelerometer as /devices/virtual/input/input3
MMA7456L driver version 0.1 (25 February 2009)
adv734x 3-002a: probe id adv734x
adv734x 3-002a: probe: I/O error -121
adv734x: probe of 3-002a failed with error -121
musb_hdrc: version 6.0, musb-dma, peripheralhost, debug=0
Ground ID inside the phy.
HS USB OTG: revision 0x33, sysconfig 0x2010, sysstatus 0x1, intrfsel 0x1, simenable 0x0
musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
musb_hdrc: MHDRC RTL version 1.400
musb_hdrc: setup fifo_mode 4
musb_hdrc: 29/31 max ep, 15424/16384 memory
musb_hdrc: hw_ep 0shared, max 64
musb_hdrc: hw_ep 1tx, max 512
musb_hdrc: hw_ep 1rx, max 512
musb_hdrc: hw_ep 2tx, max 512
musb_hdrc: hw_ep 2rx, max 512
musb_hdrc: hw_ep 3tx, max 512
musb_hdrc: hw_ep 3rx, max 512
musb_hdrc: hw_ep 4tx, max 512
musb_hdrc: hw_ep 4rx, max 512
musb_hdrc: hw_ep 5tx, max 512
musb_hdrc: hw_ep 5rx, max 512
musb_hdrc: hw_ep 6tx, max 512
musb_hdrc: hw_ep 6rx, max 512
musb_hdrc: hw_ep 7tx, max 512
musb_hdrc: hw_ep 7rx, max 512
musb_hdrc: hw_ep 8tx, max 512
musb_hdrc: hw_ep 8rx, max 512
musb_hdrc: hw_ep 9tx, max 512
musb_hdrc: hw_ep 9rx, max 512
musb_hdrc: hw_ep 10tx, max 512
musb_hdrc: hw_ep 10rx, max 512
musb_hdrc: hw_ep 11tx, max 512
musb_hdrc: hw_ep 11rx, max 512
musb_hdrc: hw_ep 12tx, max 512
musb_hdrc: hw_ep 12rx, max 512
musb_hdrc: hw_ep 13tx, max 512
musb_hdrc: hw_ep 13rx, max 512
musb_hdrc: hw_ep 14shared, max 1024
musb_hdrc: hw_ep 15shared, max 1024
musb_hdrc: USB Host mode controller at d80ab000 using DMA, IRQ 92
musb_hdrc musb_hdrc: MUSB HDRC host driver
musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Registered /proc/driver/musb_hdrc
No device for DAI WM8985 HiFi


and lsmod :

Quote:
Module Size Used by
tiwlan_drv 733588 0
sdio 10888 1 tiwlan_drv
snd_soc_wl1271 2400 0
snd_soc_omap_mcbsp 4884 0
g_ether 26884 0
musb_hdrc 64776 1 g_ether
snd_soc_wm8985 19744 0
snd_soc_core 36576 3 snd_soc_wl1271,snd_soc_omap_mcbsp,snd_soc_wm8985
snd_pcm 59941 1 snd_soc_core
snd_timer 19012 1 snd_pcm
omap_hsmmc 8792 0
snd_page_alloc 5992 1 snd_pcm
mmc_core 44352 1 omap_hsmmc
adv734x 5600 0
snd 44564 4 snd_soc_wm8985,snd_soc_core,snd_pcm,snd_timer
mma7456l 9284 0
soundcore 5860 1 snd
usb_storage 39716 1
ehci_hcd 29240 0
ubifs 145176 0
deflate 2176 1
zlib_deflate 18888 1 deflate
lzo 1440 1
lzo_compress 1920 1 lzo
lzo_decompress 2432 1 lzo
crc16 1280 1 ubifs
ubi 63012 1 ubifs
omap2 5156 2
nand 27424 1 omap2
nand_ids 2720 1 nand
nand_ecc 3072 1 nand
mtdblock 3584 0
mtdchar 6436 0
mtd_blkdevs 4928 1 mtdblock
mtd 11108 14 ubi,omap2,nand,mtdchar,mtd_blkdevs


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Wed Jul 20, 2011 1:55 am 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
it seems "firmware_class" was never loaded, does your touchscreen work? (adv i/o error) also, snd-soc-wl12.. and soc.ko were never loaded? looks funny, maybe the 32g unit differs alot, i have no way to tell, i only have 8g units...
im still using "no sound" it seems to steady out the display, i need the graphics and ram for gimp
i remove snd-soc-archos.ko in my init.rc scripts, got each running with "update-rc.d-inserv" the dsp chip wont start if the kernel can't read the firmare, and if the data isn't there (didn't reflash) it won't magically appear...
see here for more info: http://processors.wiki.ti.com/index.php ... ry:DSPLink
Quote:
j. moerman got his hd160 unit with:
Code:
insmod snd-soc-omap.ko <- android
insmod snd-soc-omap-mcbsp.ko
insmod snd-soc-wl1271.ko <- android
insmod snd-soc-wm8985.ko
insmod snd-soc-archos.ko

note: look at the init.rc of the legacy "android" firmware and you can have "more info" on how the andriod modules get loaded, i've also modified the init in the initramfs.cpio and removed the code that didn't pertain to my model.. i am also going to try and load fbcon.ko to try and correct the touch issue the device and still freezes with swap enabled(mmc partition)

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Wed Jul 20, 2011 5:13 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
thanks man :D
I install device manager(HAL) and when insmod snd-soc-omap.ko and snd-soc-archos.ko in end of list detected sound card (Wolfson-wm8985 and FM/BT-WL1271) but can not play music . not sound hearing :D

how to troubleshooting this error in debian ??? ;)


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Wed Jul 20, 2011 9:56 pm 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
floyd_cansil wrote:
thanks man :D
I install device manager(HAL) and when insmod snd-soc-omap.ko and snd-soc-archos.ko in end of list detected sound card (Wolfson-wm8985 and FM/BT-WL1271) but can not play music . not sound hearing :D

how to troubleshooting this error in debian ??? ;)

# from a remote terminal
open alsamixer and unmute the speaker and turn up volume on dsp, pcm and inputs
or you can try aaconf and the alsa/alsa-base folder from your "rom"
or the audio patch from archos-generation(minus the modules of course)
:| you may need alsa-firmware from natty, i don't qute remember, haven't used android libs since the gold.img
>also note that i'm working on getting debian to function correctly with the 2.6.37 (kernel compiles) with some code from debian/non-free ubuntu/restricted and some smoku/meego to see if i can get wifi and pvr working without faulting, it seems to work with the meego port..., so "why-not"?

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Thu Jul 21, 2011 8:37 am 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
dear penguinrepair :
Thanks for your help =D>
first my Device Is a5s . is it different hardware used in one generation ? archos 5 it 8Gb with one hardware configuration and archos 5 it 32Gb with other one?
and second why you want use 2.6.37 kernel (i know upgraded kernal has better hardware detect , memory manage , file system and ...etc) but with this kernel androids (1.6 and 2.1) can`t boot and angstrom not working properly.why ??? you say why not !!! :lol:


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Thu Jul 21, 2011 11:01 am 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
floyd_cansil wrote:
dear penguinrepair :
Thanks for your help =D>
first my Device Is a5s . is it different hardware used in one generation ? archos 5 it 8Gb with one hardware configuration and archos 5 it 32Gb with other one?
and second why you want use 2.6.37 kernel (i know upgraded kernal has better hardware detect , memory manage , file system and ...etc) but with this kernel androids (1.6 and 2.1) can`t boot and angstrom not working properly.why ??? you say why not !!! :lol:


i plan to port/reverse-engineer a sucessfully built kernel to "androidroot" and quad-boot ubu/deb/mee/avo
besides too many security issues, plus newer kernel is the only way to compile i guess, no old sources work

i'm currently flashing back to 2.6.27(2d-version), to try and get my "Microsoft® LifeCam Cinema(TM)(720i) working, perfect match for the screen, :) , i also want to get my bluetooth rockr's to work in debian, i may be forced to upgrade

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Thu Jul 21, 2011 4:05 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
dear penguinrepair
Thank you for your trying to develop archos tablets .
I think my sound problem is Seriously. :( in androids (1.6-2.1) can`t play anything (audio and video with any format : avi flv swf mpg vob mp3 wav ..........). conter is stop and when play from sdcard fast go down . in angstrom and debian conter is zero and nothing happen when playing audio and video.in debian i can manage alsamixer but can`t play anythings . :doubt:
can you help me find error in debian by many troubleshoot softwares??? ;) thanks again :)


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Fri Jul 22, 2011 5:01 am 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
register the device in the settings panel, then you will unlock your android, as far as sound in debian, i am not sure which software works with the android drivers, ubuntu has the firmare and alsa for the device as i said in earlier post, in fact the maverick version has full support for the sister device(nokian900), which has almost identical hardware... debian is based on on open-source and you are trying to use proprietary things, so you need to improvise, you can always try to compile a new drive and get things running, see this link: http://omappedia.com/index.php?title=Wi ... edirect=no it is more dedicated to the gen8 device though.

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Fri Jul 22, 2011 6:58 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
dear penguinrepair:
what about usb host , bluetooth and gps ,FM Transmitter ? can I Use This Hardware in Debian ? :)


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sat Jul 23, 2011 9:23 am 
Offline
Archos User
Archos User

Joined: Fri Apr 29, 2011 6:03 pm
Posts: 97
floyd_cansil wrote:
dear penguinrepair:
what about usb host , bluetooth and gps ,FM Transmitter ? can I Use This Hardware in Debian ? :)

host mode seems to crash using the newer(11-11-10) bubu kernel (this is controlled with musb_hdrc default_mode=* ) 3 will enable storage, but my kernel faults :( host mode needs ehci-hcd.ko to be loaded, i have yet to see it work :doubt: with my micro-keyboard...
(bluetooth differs from device to device, load the modules (see your init))
i've experimented with hciattach and hcid, they have to be run from (/system/bin/) or they "bug-out"
i haven't connected yet, i need a bluetooth gui that works in enlightenment/openAOS kernel( im still having video issues), i can see the archos from my phone, but not successful connection....
Code:
#enabling it is easy:
echo 1 > /sys/devices/platform/wifi_bt/bt_enable

im not sure if the command-line bluez-tools are working properly to connect to my headset..
gps is enabled on my device, i load the module mma?.ko(yours may be different) to activate it
(/dev/input/input3)
as far as everything else "i dunno" it sees my dvr-station, but i wasn't having luck swapping video in android, so i am not sure if the device will truely use the dock, my 2.1(sold it) board worked fine, but the 2.3 board doesn't phase correctly, i have signal just no picture :/

_________________
a5it-8g debian-android-anoa


Top
   
 Post subject: Re: debian on a5it?
PostPosted: Sat Jul 23, 2011 3:53 pm 
Offline
Archos Novice
Archos Novice

Joined: Sun Jun 05, 2011 11:46 am
Posts: 26
Hello :
I have problem with usb host . I modprobe musb_hdrc default_mode=3 and insmod ehci-hcd.ko but usb devices (cool disk and bluetooth and mouse ) not detected in debian . should I connect usb device to hub for power ( +5V) ???
Thanks to reply ;)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 91 posts ]  Go to page Previous 1 2 3 4 5 Next

All times are UTC+01:00


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited